Acrylic Splashbacks Vs Glass Vs Bonethane® Splashbacks & Wall Panels
Splashback & Wall Panel Suppliers, many categories delivered nationally
IPA Acrylic Splashback Installation Tutorial - YouTube Acrylic Splashback Installation ISPS Innovations
Want to understand the differences between Colour-back Acrylic Panels & other substrates please read below. Want the best Acrylic Splashback & Wall Panel prices!
ISPS will beat any quote on custom 6mm PMMA Acrylic sheeting & still provide GRIPTEK backing.
ISPS Innovations supply Acrylic Splashbacks and Benchtops that are custom made to Sydney, Melbourne, Adelaide, Perth, Brisbane, Darwin, Canberra, Tasmania
For the placement of Bonethane splashbacks if heat to the rear of the cooktop exceeds 110° C at 60 mm space to the rear, please ensure appropriate space is addressed for air flow, refer to cooktop or appliance you purchased for more information.
Why is Bonethane® the DIY favourite!
- Greater heat distribution and electrical resistance than Acrylic
- Self extinguishing once ignition source is removed.
- The look of Glass without the stress of shattering, exploding or cracking.
- Quick to install
- Bonethane Australian Made
- Critical Strength, impact and breakage defiant.
- Coloured in any colour EFX & printed splashbacks
- UV treated.
- No need to coat wall neutral colour prior to install, saving time on preparation and curing of wall. Only the corners where sheets overlap and butt joining require a 20 mm neutral colour painted strip either side of the sheet placement.
- Can be fully recycled
- Can be cut drilled and planned without cracking and splitting making Bonethane the DIY favourite!
- Bonethane has the same cutting fabrication as MDF or Timber.
- Cut shapes and innovative angles with ease, without the stress of the substrate exploding, cracking or splitting on you.
- Continuous service temp 110°C.
- Low weight, superior strength.
- Custom VetroPoly toughened glass insert in 6mm thickness available in any size for gas burners in silver or can be colour toned to blend with Bonethane & Acrylic grades for service temperatures that exceed 110°C
- No Minimum order quantity for colour toning or blending.
- GripTek barrier backing means there is no need to coat wall total wall a neutral colour, saving you time. Just the corner where sheets overlap and where sheets butt join, 20 mm either side.
- You can add additional cut outs years down the track if you have a cavity behind your wall, without Bonethane splitting or cracking.
- Do you have lots of ground movement in your home that causes cracks in your walls? With Bonethane you are given time to remove the sheet from the wall without damaging your splashback, ensuring you protect the face of the sheet. Acrylic, glass or tiles will not allow you to do this as it will snap, shatter or split by this process.
- Bonethane can be buffed and repaired with ease and in half the time of Acrylic.
- Easier to handle
- UV protected
- Can be ordered in sheet size, cut to shape or cut to size, refer MEASURE & INSTALL TAB to down load templates
- Wash with soapy water, rinse residue, wipe with clean warm damp towelling cloth or cameo, wipe in down motion & walk away. Bonethane® air dries and shines.
- Carries a 7 year Warranty.
- Commercial orders larger sheet sizes can be produced MOQ
- Delivered Nationally
Why IPA Acrylic Splashbacks & Wall Panels?
Colour-back Acrylic Sheeting the sentiment of glass with out the cost
- 6mm or 3.5mm IPA Acrylic is cost effective and can be cut on site
- Available in 143 colours or choose a colour
- Is stronger than glass.
- IPA Acrylic is used as a Marker Board and Projector Screen
- IPA Acrylic comes with GRIPTEK backing.
- Cost effective just look at our on line prices
- High gloss or satin finish
- Available in custom EFX
- Hard wearing face like pressed aluminium
- Can be buffed and repaired with ease
- UV protected
- ISPS use high quality Acrylic with great colour depth
- Continuous service temp 65°C
- Can be ordered in sheet size, cut to shape or cut to size
- Fabulous for bathroom, feature walls shop fit-outs, medical, entertainment venues, homes with endless options
- Shop fitter and trades best friend, matching any corporate colour.
- IPA Acrylic is available as a printed splashback & comes with GRIPTEK backing
- Cutting must be planned and mapped out. Acrylic does not cut as easy as Bonethane Premium®
- Wash with soapy water, rinse residue, wipe with clean warm damp towelling cloth or cameo, wipe in down motion & walk away. IPA Acrylic air dries and shines.
- Wall does not need to be coated a neutral colour prior to installation
- Sheet size up to 2 x 3m
- Commercial orders larger sheet sizes can be produced MOQ
- Custom toughened glass in 6mm thickness available in any size for gas burners & induction cooktops in silver or can be colour toned to blend with Premium & Acrylic grades.
- Acrylic should not go behind any cooktop.
- Delivered Nationally
- Use highest quality PMMA acrylic creating our innovative splashbacks by ISPS Innovations
- IPA ACRYLIC Splashback & wall panel sheets have been quality tested since 1998, our range featured on home renovation shows & publications like The Block, Renovator, Better Homes and Gardens & Woman's Weekly.
Why ISPS Toughened Glass
- Exceptional Heat source for behind gas hob
- Available in Float or Starfire toughened Glass.
- High gloss finish
- used for gas burners
- Can only be ordered cut to size & shape so its ready to go.
- You can not cut toughened glass
- Available in any colour
- Delivered Nationally
- Carries more individual costs than Bonethane Premium & Acrylic as both Bonethane and Acrylic can be cut on site prior to install, but toughened glass can not be cut after toughening.
- Elegant and toughened
- Glass face can not be repaired like Bonethane or IPA Acrylic.
- Great for bathrooms, Kitchens, indoors and outdoors
- The Painted Glass we produce has been used on THE BLOCK
- NOTE: Flames and Appliance, hot pans, pots etc should not be be pressed up against glass when elements or gas burner is on, whilst glass has a high heat tolerance the coatings on the back of glass are not as forgiving. Only apply cooking pans within the parameter of cooking electrical or gas element. Pans and pots should never sit over cooking parameter where it extends over to benchtops or wall backings. Cooking should always be monitored and never left unattended. DO NOT LEAVE PANS OR HOT POTS RESTING ON GLASS OR POLYMER BACKING EVER -ISPS INNOVATIONS DO NOT WARRANTY THIS AT ALL..
- Note painted and printed toughened glass splashbacks can discolour if pots, pans or flames touch the glass. Whilst glass tolerates heat the coating & print can only deal with a 1/4 of the temperature load.
If you have any further questions call ISPS 7 days a week 9 am till 9pm 7 days a week nationally
